TESDA Approved Welding Vocational Training Courses Offered ARMM

For those who are residents of any of the ARMM provinces of Basilan, Lanao del Sur, Maguindanao, Sulu, and Tawi-Tawi who are looking for TESDA accredited training centers that offer TESDA Approved Welding Vocational Training Courses Offered ARMM. In this article, we will be providing you with a list showing the names of all the TESDA accredited schools in the Autonomous Region of Muslim Mindanao with welder training courses offered. This list was provided by TESDA agency and re-posted here at tesdaapprovedcourses.blogspot.com for easier access.

Given below are the names of schools and training centers in ARMM that offer any of the TESDA approved welding short courses including their location address, and available telephone or mobile numbers.   

TESDA Approved Welding Vocational Courses Offered Caraga Region

For those who are residents of any of the Caraga Region provinces of Agusan del Norte, Agusan del Sur, Surigao del Norte, and Surigao del Sur who are looking for schools and training centers with TESDA Approved Welding Vocational Courses Offered Caraga Region.

In Agusan del Norte, there are 5 TESDA accredited schools including a Provincial Training Center in Cabadbaran City. In Agusan del Sur, there are 3 accredited schools including a Provincial Training Center in Prosperidad.

In Surigao del Norte, there are 8 accredited schools including 2 Provincial Training Centers located in Siargao and Surigao City. Surigao del Sur on the other hand has 6 TESDA accredited schools.

Shown below are the names of all the accredited schools and training centers in each province that comprises the Caraga Region including their location address, hotline numbers, and TESDA approved welder training courses.   

TESDA Approved Welder Training Vocational Courses Offered Region XII

In Region XII or commonly known as SoCCSKSarGen, there are a few TESDA accredited schools and TESDA training centers that offer TESDA Approved Welder Training Vocational Courses Offered Region XII. 

In the province of South Cotabato, there are 9 accredited schools with various welding courses offered. The province of Cotabato on the other hand has a total of 8 accredited schools. In Sultan Kudarat, 5 schools are offering a variety of welding courses including a Regional Manpower Development Center in Barangay Rebuken. The province of Sarangani on the other hand only have 2 accredited schools and General Santos City has 15 accredited schools. 

Furnished below is the list of all the TESDA accredited schools in the Region 12 provinces of South Cotabato, Cotabato, Sultan Kudarat, Sarangani, and General Santos City including their location address, contact numbers, and specific welding course or welding courses they offer.   

TESDA Approved Welding Short Courses Offered Region XI

For those who are looking for TESDA Approved Welding Short Courses Offered in the Region XI provinces of Compostela Valley, Davao del Norte, Davao del Sur, Davao Occidental, Davao Oriental. We at TESDA Approved Courses have compiled and posted below, a list showing the names of all the TESDA accredited schools and TESDA training centers that offer welder training courses.

The names of the schools and training centers on this list were provided by TESDA thru their website. We just arranged it by province so you can find the nearest welder training centers that offer your chosen welding short course.

Shown below are the names of every TESDA accredited schools and training centers in the Region 11 provinces of Compostela Valley, Davao del Norte, Davao del Sur, Davao Occidental, and Davao Oriental including their current address, hotline numbers, and specific welding vocational courses they offer.    

TESDA Approved Welding Short Courses Offered Region X

For those who are looking for TESDA Approved Welding Short Courses Offered Region X, we have gathered and posted below, the names of all the TESDA accredited training centers in the provinces of Bukidnon, Lanao del Norte, Misamis Occidental, and Misamis Oriental that offers any of the TESDA approved welder training courses. .

These welding vocational courses are an important component of the agency's TVET program which aims to promote technical vocational education and training to many of our countries mid-level workers, out of school youths, high school graduates, or anyone who is interested in acquiring skills to a wide range of occupational fields, production, services, and livelihoods.

Given below are the names of all the TESDA accredited schools and TESDA training centers in the Region 10 provinces of Bukidnon, Lanao del Norte, Misamis Occidental, and Misamis Oriental including their address, hotline numbers, and TESDA approved welding course.   

TESDA Welding Vocational Courses Offered Region IX

For those in the Region IX provinces of Zamboanga del Norte, Zamboanga del Sur, and Zamboanga Sibugay who are interested in enrolling in a TESDA Welding Vocational Courses Offered Region IX. 

These Welder training courses offered by TESDA and its accredited schools and training centers, are included in the list of vocational training courses under the agency's TVET or Technical Vocational Education and Training program. The TVET program enables the Filipino mid level workforce to be more flexible, productive, and at par even with their foreign counterpart.

Shown below are all the available welding short courses offered by TESDA accredited schools and TESDA training centers in the 3 provinces consisting Region IX.   

TESDA Welding Vocational Courses Offered Region VIII

For the residents of the Region 8 provinces of Biliran, Eastern Samar, Leyte, Northern Samar, and Southern Leyte who wish to enroll in any of the TESDA Welding Vocational Courses Offered Regin VIII. TESDA is the lead government agency tasked with promoting TVET or Technical Vocational Education and Training to as many Filipinos as possible. 

All the schools and training centers on this list are TESDA accredited and were sourced from the list found at the agency's website including the TESDA approved welding courses they offer. All the welder training courses offered by accredited schools and accredited training centers can be availed for free thru limited free training vouchers given to each TESDA accredited school or by acceptance in any of the TESDA Scholarship Programs.

Shown below is the list of all the TESDA accredited schools and training centers in the provinces of Biliran, Northern and Eastern Samar, Leyte, and Southern Leyte including the TESDA approved Welding course or courses they offer and the corresponding NC Level for each welder training course. 

TESDA Welding Vocational Courses Offered Region VII

For those who are looking for TESDA accredited schools and training centers with TESDA Welding Vocational Courses Offered Region VII. In this posting, you will be provided with a list showing the names of all the accredited schools and accredited training centers in the provinces of Bohol, Cebu, and Negros Oriental.

As the lead agency that is responsible for implementing the Technical Education and Skills Development Program of the government, TESDA must promote appropriate standards, set direction, and formulate programs aimed at ensuring a quality technical education and skills development and certification system.

Given below are the names of all the TESDA accredited schools and TESDA training centers in each of the Region VII provinces including the specific TESDA approved welder training courses they offer and its corresponding qualification.   

TESDA Welding Vocational Courses Offered Region VI

For the residents of any of the Region VI provinces of Aklan, Antique, Capiz, Guimaras, Iloilo, and Negros Occidental who are searching for TESDA accredited schools and TESDA training centers with TESDA Welding Vocational Courses Offered Region VI.

The schools and training centers on this list operate under direct supervision and monitoring of the agency to ensure the quality of training they provide their students are in accordance with international competency standards that are being implemented by the agency.

Given below is the list of accredited schools and accredited training centers that operate in the provinces of Aklan, Antique, Capiz, Guimaras, Iloilo, and Negros Occidental including the TESDA approved welder training courses they offer.   

TESDA Welder Training Courses Offered Region V

In Region V, there is a total of 33 TESDA accredited schools with various TESDA Welder Training Courses Offered Region V. In the province of Albay, there are 8 accredited schools including 2 Provincial Training Centers located in Malilipot and Guinobatan. Another Region 5 province is the province of Camarines Norte. Here, there are 6 accredited welder training centers including a Provincial Training Center located in Labo.

The third Region V province is the province of Camarines Sur. Cam Sur have 9 accredited welding schools including a Provincial Training Center in Libmanan and a Regional Training Center in Pili. The fourth Region V province is the province of Catanduanes. Here, there is only one TESDA accredited school that offer welding training course.

The fifth and sixth Region 5 provinces are the provinces of Masbate and Sorsogon. In Masbate, there are 6 accredited welding schools while the province of Sorsogon have 3 accredited welder training schools.

Given below is the list of all the TESDA accredited welder training schools including their TESDA approved welder training courses.    

TESDA Welder Training Courses Offered Mimaropa

For those who are residents of the provinces of Marinduque, Occidental Mindoro, Oriental Mindoro, Palawan, or Romblon who are looking for TESDA Welder Training Courses Offered Mimaropa. This posting is about the various TESDA approved welding vocational courses offered by varius TESDA accredited schools in Region IV-B or Mimaropa.

For the province of Marinduque, there are 5 TESDA accredited schools that offer TESDA vocational welding courses including a Provincial Training Center in Boac.

For Occidental Mindoro, there is only 1 TESDA accredited school with welder training courses offered and Palawan and Romblon only have 2 accredited training centers each. 

Oriental Mindoro on the other hand have 10 TESDA accredited training centers including a Provincial Training Center in San Teodoro.

Given below is the list of all the accredited schools and training centers for the entire province of Region IV-B including the specific welder training courses they offer.   

TESDA Approved Welding Courses Region IV A Calabarzon

Southern Tagalog region is divided into two, Region IV A and Region IV B. And for this posting, we will be providing you with information regarding TESDA Approved Welding Courses Region IV A. Also known as Calabarzon, Region IV A is composed of the provinces of Cavite, Laguna, Batangas, Rizal, and Quezon. In Cavite, there are 15 TESDA accredited schools including two provincial training centers in the municipalities of Rosario and Paliparan. Laguna on the other hand have 15 TESDA accredited schools with a provincial training center located in the municipality of Calauan. Batangas also have 15 TESDA accredited schools including a regional training center in Batangas City. Rizal only have 12 TESDA accredited schools including 2 PTESDC or Provincial Technical Education and Skills Development Center. And lastly, Quezon province has 11 TESDA accredited schools and no TESDA regional or provincial training centers.

Given below are the names of all the TESDA accredited schools in each of the said provinces including their address, hotline numbers, and the specific TESDA approved welding course or courses they offer.   

TESDA Approved Welding Courses Region III

For those in the provinces of Aurora, Bataan, Bulacan, Nueva Ecija, Pampanga, Tarlac, and Zambales who wish to enroll in any of the TESDA Approved Welding Courses Region III. Each welding course offered by a TESDA accredited school must be a TESDA registered program. That way, the agency can closely monitor and supervise the delivery of training for each TESDA course to ensure that the training centers conforms with the training standards required by the agency.

Given below is the list of all the TESDA accredited training schools in the provinces of Aurora, Bataan, Bulacan, Nueva Ecija, Pampanga, Tarlac, and Zambales including their location address, hotline numbers, and specific welding courses they offer.   

TESDA Approved Welding Courses Region II

In Region II, the provinces of Cagayan, Isabela, Nueva Vizcaya, and Quirino, are offering its residents the opportunity to enroll in any of the TESDA Approved Welding Courses Region II. These welder training courses offered by TESDA accredited schools in Cagayan, Isabela, Nueva Vizcaya, and Quirino province are all TESDA approved and conforms with the international training standards being implemented by the agency.

Shown below are the names of all the agency accredited schools and training centers in each Region 2 province including their address, hotline numbers, and specific vocational welding courses they offer.   

TESDA Approved Welding Courses Region I

For those who are looking for TESDA Approved Welding Courses Region I, we have compiled and posted below, the names of all the TESDA accredited schools and TESDA training centers in the Region I provinces of Ilocos Norte, Ilocos Sur, La Union, and Pangasinan.

Each welding course offered by accredited training centers in Region I are TESDA registered programs which means that the agency closely monitors and supervise the skills training for each TESDA course offered. Each course offered by accredited schools have a corresponding number of free training voucher given to the training center that offer them. These free training vouchers can be only be availed by a limited number of qualified student trainees. For details on the TESDA scholarship programs, please click HERE.

Furnished below is the list of TESDA accredited schools in each Region I province and the TESDA approved courses they offer.   

TESDA Approved Welding Courses Cordillera Administrative Region (CAR)

 For those in the provinces of Abra, Benguet, Ifugao, Kalinga, and Mountain Province who are looking for TESDA Approved Welding Courses Cordillera Administrative Region or CAR. tesdaapprovedcourses.blogspot.com have compiled and posted below, the names of all the TESDA accredited schools and TESDA training centers in the provinces of Abra, Benguet, Ifugao, Kalinga, and Mountain Province. The names on this list was gathered from the list provided by TESDA thru their website. Given below are the TESDA approved welding courses for the provinces in the Cordillera Administrative Region. 

Shielded Metal Arc Welding (SMAW) NC I 

Shielded Metal Arc Welding (SMAW) NC I - Mobile Training Program 

Shielded Metal Arc Welding (SMAW) NC II 

Shielded Metal Arc Welding (SMAW) NC II - Mobile Training Program 

Gas Tungsten Arc Welding (GTAW) NC II 

Gas Metal Arc Welding (GMAW) NC II

As mentioned, shown below are the names of all the accredited schools and accredited training centers in the entire CAR including their location address, hotline numbers, and vocational training courses they offer.   

TESDA Approved Welding Courses Metro Manila

For those who want to enroll in a TESDA approved welding course, TESDA together with a number of its TESDA accredited schools in the cities of Metro Manila, are now offering various TESDA Approved Welding Courses Metro Manila. Shown below are the TESDA approved welding courses offered in Metro Manila.

Shielded Metal Arc Welding (SMAW) NC I

Shielded Metal Arc Welding (SMAW) NC I - Mobile Training Program

Shielded Metal Arc Welding (SMAW) NC II

Shielded Metal Arc Welding (SMAW) NC II - Mobile Training Program 

Shielded Metal Arc Welding (SMAW) NC III

Gas Tungsten Arc Welding (GTAW) NC II

Flux-Cored Arc Welding (FCAW) NC II 

Gas Metal Arc Welding (GMAW) NC I

Gas Metal Arc Welding (GMAW) NC II 

All the TESDA approved welding courses offered by TESDA accredited training centers are free and can be availed by anyone who are qualified and must be one of the early enrollees to fill the allotted slot for TESDA free training.

Given below is the list of all the TESDA accredited schools with TESDA approved welding courses Metro Manila. The list is arranged alphabetically by city and by training center and also included the training center's address, contact numbers, and specific welding course they offer.   

TESDA Approved Trainers Methodology Training Course

For those who would like to enroll in TESDA Approved Trainers Methodology Training Course, we at TESDA Approved Courses have assembled below a list containing the names of all the TESDA accredited schools and TESDA training centers nationwide with TESDA Approved Trainers Methodology Training Course. The Trainers Methodology course offered are for Level I and Level II and given below are the details for each of the said TESDA training course offered.   

Trainers Methodology Level I

Minimum Training Duration

128 hrs. (Basic Competencies)

136 hrs. (Core Competencies)

Trainee Entry Qualifications

Candidate/trainee must satisfy the following requirements -- :

• Graduate of baccalaureate degree or equivalent in training/experience along the field of Technical -Vocational Education and Training
• Certified at the same or higher NC Level in the qualification that will be handled (for technical trainers)
• Able to communicate orally and in writing
• Physically fit and mentally healthy
• Proficient in quantitative and qualitative analysis
• Proficient in verbal reasoning.

A person who has achieved Trainers Methodology Level I Qualification is qualified to fill the position of a:

1. TVET Trainer/Technical Trainer
2. Training Facilitator/Coordinator
3. Competency Assessor

Trainers Methodology Level II

Trainee Entry Qualifications

Candidate/trainee must reach/possess any of the following qualification:

• BS Graduate or equivalent
• Certified at the same or higher NC Level in the qualification that will be handled (for technical trainers)

A person who has achieved Trainers Methodology Level II Qualification is qualified to work as a:

1. Curriculum designer
2. Instructional designer
3. Training designer/developer

Shown below is the regional list of all the TESDA accredited Trainers Methodology training centers including their office address and their available contact numbers that you can use to relay your inquiries.   

TESDA Approved Tile Setting Vocational Training Course

For those who wish to learn Tile Setting, TESDA together with several TESDA accredited schools and TESDA training centers are offering TESDA Approved Tile Setting Vocational Training Course. This short vocational course is one of the TESDA registered programs and given below are the details for Tile Setting NC II short course.

Minimum Training Duration 

37 hours Basic Competencies

24 hours Common Competencies

56 hours Core Competencies

Trainee Entry Qualifications

Trainees or students who wish to enter this training should possess the following qualifications:

At least Junior High School Level completer or an Alternative Learning System (ALS) Certificate of Completion with grade 10 equivalent holder or Holder of Masonry NC I

Can communicate both orally and in writing

Physically fit

For those who are interested to enroll in Tile Setting NC II course offered by a TESDA accredited school or TESDA training center, you can refer to the regional list of schools and training centers that we have posted below.   

TESDA Approved Technical Drafting Vocational Course

For those who wish to work as a Draftsman or a CAD Operator, TESDA together with a number of TESDA accredited schools and TESDA training centers nationwide, are now offering TESDA Approved Technical Drafting Vocational Course. This TESDA vocational course is a TESDA registered program for each of the TESDA accredited school in this list. This means that the training delivery for Technical Drafting NC II is constantly monitored and supervised by TESDA to ensure they conform with internationally recognized standard of competency.

Shown below are the details for the training duration and trainee qualifications for the TESDA approved Technical Drafting NC II training course.

MINIMUM TRAINING DURATION: 148 hrs

18 hrs. (Basic Competencies)

36 hrs. (Common Competencies)

94 hrs. (Core Competencies)

TRAINEE QUALIFICATIONS

For a Filipino to qualify for TESDA training in Technical Drafting NC II, he or she has to have the following qualifications:

1. Good moral character.
2. Ability to communicate.
3. Physically fit and mentally healthy.
4. Can perform basic mathematical computation and mensuration.

A person who has achieved Technical Drafting NC II qualification is qualified to fill the position of a Draftsman or a CAD operator.

As mentioned, given below is the list of all the TESDA accredited schools and TESDA training centers in each region with TESDA approved Technical Drafting vocational short course.   

TESDA Approved Slaughtering Operations Training Courses

For those who wish to work abroad as Butchers, TESDA and a few TESDA accredited schools, are now offering Slaughtering Operations NC II. These Slaughtering Operations training course are for slaughtering large animals and slaughtering swine or pig. For Slaughtering Operations (Large Animals) NC II, the minimum butcher training duration and trainee qualifications required by TESDA agency are: 

SLAUGHTERING OPERATIONS (LARGE ANIMALS) NC II

Minimum Training Duration: 

 

  20 Hrs. (Basic Competency)

  20 Hrs. (Common Competency)

320 Hrs. (Core Competency)

TRAINEE QUALIFICATIONS

Trainees or students who wish to enter this training should possess the following qualifications:

1. Must have completed 10 years basic education.
2. Can communicate both orally and in writing.

A person who has achieved Slaughtering Operations (Large Animals) NC II qualification is competent to work as a Slaughterhouse Butcher (Large Animals). 

For Slaughtering Operations (Swine) NC II, the minimum butcher training duration and trainee qualifications required by the agency are:

SLAUGHTERING OPERATIONS (SWINE) NC II

Minimum Training Duration: 

 

  20 Hrs. (Basic Competency)

  20 Hrs. (Common Competency)

240 Hrs. (Core Competency)

TRAINEE QUALIFICATIONS

Trainees or students who wish to enter this training should possess the following qualifications:

1. Must have completed 10 years basic education.
2. Can communicate both orally and in writing.

A person who has achieved Slaughtering Operation (Swine) NC II qualification is competent to work as a Slaughterhouse Butcher (Swine).

Shown below is the regional list of TESDA accredited schools with TESDA approved Slaughtering Operations (Large Animals) NC II and Slaughtering Operations (Swine) NC II.   

TESDA Approved Security Services Training Courses Offered

For those who wish to work as Security Guards and would like to have the proper training to qualify for work in the security services sector. At present, there are close to 50 TESDA accredited schools nationwide with TESDA Approved Security Services Training Courses Offered. Given below are the details for Security Services NC I and Security Services NC II. 

SECURITY SERVICES NC I

Minimum Training Duration 

  28 hrs. (Basic Competencies)

  36 hrs. (Common Competencies)

106 hrs. (Core Competencies)

TRAINEE ENTRY REQUIREMENTS

Trainees or students who wish to enroll in Security Services NC I should possess the following qualifications:

• Filipino citizen.
• High School Graduate;
• Physically and mentally fit.
• Not less than eighteen (18) years of age nor more than fifty (50) years of age (for new applicants and SGs in non-supervisory position).
• Has undergone a pre-licensing training course or its equivalent.

SECURITY SERVICES NC II

Minimum Training Duration 

 18 hrs. (Basic Competencies)

 40 hrs. (Common Competencies)

165 hrs. (Core Competencies)

TRAINEE ENTRY REQUIREMENTS

Trainees or students wishing to enroll in these course qualifications should possess the following qualifications:

• Must possess a Private Security License/Special Bank Receipt (SBR) authenticated by the Personnel Licensing Section – SAGSD-PNP to exercise profession.
• Must possess Pre-Licensing Training Certificate or its equivalent duly authorized by the Private Security Training Management Branch (PSTMB-SAGSD-PNP) under Section 3 Rule V of the 2003 Revised Rules and Regulations Implementing RA 5487 As Amended.
• Ability to communicate.
• Physically fit and mentally healthy as certified by a Public Health Officer.

For your convenience, we have given below the regional list of all TESDA accredited schools with TESDA approved Security Services NC I or Security Services NC II training course offered.   

TESDA Approved RAC Servicing Training Courses Offered

For those who wish to learn Refrigeration and Air Conditioning Servicing, we at tesdaapprovedcourses.blogspot.com have gathered and posted below, a list showing the names of all the schools and training centers nationwide that are TESDA accredited and has TESDA Approved RAC Servicing Training Courses Offered.

This Refrigeration and Air Conditioning Servicing course is included in the list of tec-voc courses being offered by TESDA thru TESDA accredited schools. These accredited schools and training centers are constantly monitored by the agency to make sure they comply with the training standards required for each competency.

Provided below is the nationwide list of TESDA accredited schools and TESDA training centers with TESDA approved RAC Servicing training courses offered.   

TESDA Approved Plumbing Vocational Courses Offered

For those who wish to learn Plumbing, TESDA, together with a number of TESDA accredited schools nationwide, are offering Filipinos the chance to enroll in TESDA Approved Plumbing Vocational Courses Offered. These Plumbing vocational courses offered are for Plumbing NC I, Plumbing NC II, and Plumbing NC III and given below are the details for each of the said Plumbing training course.

PLUMBING NC I

Nominal Training Duration 

 

 28 Hrs. (Basic Competency)

 20 Hrs. (Common Competency)

120 Hrs. (Core Competency)

TRAINEE ENTRY REQUIREMENTS

• At least Junior High School (Grades 9 and 10) level or graduate.
• Can perform basic mathematical computation.
• Able to communicate orally and in writing.

PLUMBING NC II

Nominal Training Duration

 18 Hours (Basic Competency)

 24 Hours (Common Competency)

160 Hours (Core Competency)

TRAINEE ENTRY REQUIREMENTS

• At least Senior High School (Grade 11 and 12) level or graduate.
• Holder of Plumbing NC I or relevant industry experience (plumbing works) for a minimum of 2 years in all of the following:

1. Prepare Plumbing Layout
2. Make Piping Joints and Connections
3. Perform Minor Construction Works
4. Install and Assemble Single Plumbing Unit

      Note: Certified by the employer or a Registered Master Plumber

• Able to communicate orally and in writing.
• Can perform basic mathematical computations.

PLUMBING NC III

Nominal Training Duration

 24 hours (Basic Competency)

 24 hours (Common Competency)

200 hours (Core Competency)

TRAINEE ENTRY REQUIREMENTS

• At least Grade 12 graduate.
• Holder of National Certificate for Plumbing NC II or relevant industry. experience (plumbing works) for a minimum of 3 years in all of the following:

1. Prepare estimation of materials for single plumbing unit
2. Perform Complex Plumbing Installation and Assemblies
3. Conduct pipe leak testing
4. Perform plumbing repair and maintenance works

      Note: Certified by the employer or a Registered Plumber

• Able to communicate orally and in writing.

To make your search, for TESDA accredited schools with Plumbing course offered, easier, we have arranged the names of the training centers by region and by city or municipality and posted it below. Also included are the specific Plumbing course they offer, the training centers current address, and their available contact numbers.   

TESDA Approved Organic Agriculture Production Training Courses Offered

For those who wish to learn Organic Farming, TESDA together with a number of TESDA accredited schools and TESDA training centers nationwide, are offering Filipinos, the chance to enroll in TESDA Approved Organic Agriculture Production Training Courses Offered.

The Organic Agriculture Production NC II vocational training course is composed of competencies that an individual must achieve to produce organic farm products like chicken and vegetables including the production of organic supplements like extracts, concoctions, and fertilizers. It has two elective competencies which are raising organic small ruminants and raising organic hogs. Provided below are the details of training duration and trainee entry qualifications for Organic Agriculture Production NC II 

Nominal Training Duration

 

18 hrs. Basic Competencies

64 hrs. Common Competencies

96 hrs. Core Competencies

54 hrs. Elective Competencies

Trainee Entry Qualifications

Trainees or students wishing to enroll in this course must have the following qualifications:

• Able to read and write.
• With good moral character.
• Ability to communicate, both oral and written.
• Physically fit and mentally healthy as certified by a Public Health Officer.

Those who have successfully achieved Organic Agriculture Production NC II qualification is competent to work as:

Organic Agriculture Farmer

Organic Chicken Raiser

Organic Hogs Raiser

Organic Small Ruminants Raiser

Organic Vegetables Farmer

Organic Concoctions and Extracts Producer

Organic Fertilizer Producer

 

Given below are the names of all the TESDA accredited schools and TESDA training centers in each region with TESDA approved Organic Agriculture Production training courses offered.   

TESDA Approved Motorcycle/Small Engine Servicing Vocational Courses Offered

For those who are looking for TESDA accredited schools with TESDA Approved Motorcycle/Small Engine Servicing. These accredited schools and training centers nationwide are under guidance and strict monitoring by TESDA agency to make sure comply in accordance with industry standards. Given below is the required minimum training duration and trainee qualifications for Motorcycle/Small Engine Servicing NC II.

Minimum Training Duration: 

 18 Hours (Basic Competency)

 88 Hours (Common Competency)

544 Hours (Core Competency)

Trainee Qualifications

Trainees or students should possess the following requirements:

• Can communicate both orally and in writing.
• Can perform basic mathematical computation.
• At least Senior High School (Grade 11 ) level.
• At least holder of Student Permit or LTO license (Restriction Code 1).

For a more convenient search, we have arranged the list of TESDA accredited schools, by region and by city or province. Furnished below is the regional list of all the TESDA accredited schools and TESDA training centers with TESDA approved Motorcycle/Small Engine Servicing training course offered.   

TESDA Approved Mechatronics Servicing Training Courses Offered

For those who wish to study Mechatronics, TESDA together with some of the TESDA accredited schools nationwide, are offering the public the chance to enroll in any of the TESDA Approved Mechatronics Servicing Training Courses Offered. The TESDA approved Mechatronics Servicing courses have qualifications for NC II, NC III, and NC IV and given below are details for the training duration and trainee entry requirements for each of the Mechatronics Servicing Course. 

Mechatronics Servicing NC II

Nominal Training Duration: 

18 hrs – Basic Competencies

60 hrs – Common Competencies

80 hrs – Core Competencies

Trainee Entry Requirements

The trainees who wish to enter the course should possess the following requirements:

Must have completed at least 10 yrs. basic education or an alternative learning systems (ALS) certificate of achievement with grade 10 equivalent holder.

Can communicate orally and in writing.

Can perform basic mathematical computations.

Mechatronics Servicing NC III

Nominal Training Duration: 

 

  32 hrs – Basic Competencies

  60 hrs – Common Competencies

104 hrs – Core Competencies

Trainee Entry Requirements

The trainees who wish to enter the course should possess the following requirements:

Must have completed training in Mechatronics Servicing NC II.

Can communicate orally and in writing.

Can perform basic mathematical computations.

Mechatronics and Automation Servicing NC IV

Nominal Training Duration: 

  30 hrs – Basic Competencies

  64 hrs – Common Competencies

106 hrs – Core Competencies 

Trainee Entry Requirements

The trainees who wish to enter the course should be holder of Mechatronics Servicing NC III.

Shown below are the names of all the TESDA accredited Mechatronics Servicing Training Schools nationwide including the specific Mechatronics Servicing course they offer, the training center's current address, and their available contact numbers that you can dial to make inquiries.   

TESDA Approved Machining Vocational Courses Offered

 For those who wish to learn Machining, TESDA together with a number of TESDA accredited schools nationwide, are offering Machining NC I, Machining NC II, and Machining NC III.

Shown below are the details for the Training Duration and Trainee Entry Qualifications for Machining NC I. 

Nominal Training Duration: 

 47 Hours (Basic Competencies)

 60 Hours (Common Competencies)

859 Hours (Core Competencies)

624 Hours (SIT)

-------------

 1,590 Hours

Trainee Entry Qualifications for Machining NC I

To qualify for enrollment in Machining NC I, all enrollees must have the following qualifications:

• Able to read and write.
• Can perform basic mathematical computation.
• Ability to communicate (non-verbal and verbal).
• Physically fit (health condition).

For Machining NC II, the required training duration for the Basic, Common, and Core Competencies are:

 

 18 Hours (Basic Competency)

 12 Hours (Common Competency)

307 Hours (Core Competency)

Trainee Entry Qualifications for Machining NC II

To qualify for enrollment in Machining NC II, all enrollees must have the following qualifications:

• With good moral character.
• Able to communicate both orally and in writing.
• Physically and mentally fit.

For Machining NC III, the required Minimum Training Duration is 342 Hours and to qualify for enrollment in Machining NC III, student trainees must have the following qualifications:

• Must be holder of Machining NC II.
• Must be high school graduate.
• With good moral character.
• Ability to communicate.
• Physically and mentally fit.

Provided below are the names of all the TESDA accredited schools and TESDA training centers nationwide with TESDA approved Machining vocational courses offered.   

TESDA Approved Massage Therapy Training Course

For those who wish to learn Massage Therapy, TESDA in partnership with some of the TESDA accredited schools and TESDA training centers, are offering free Massage Therapy training to a limited number of qualified student enrollees. The said Massage Therapy course has an NC II level qualification and requires the following minimum training duration for each competency:   

MASSAGE THERAPY NC II

Minimum Training Duration:

 20 hrs. Basic Competencies

 56 hrs. Common Competencies

624 hrs. Core Competencies

To qualify for Massage Therapy training, trainees or students who want to enroll in this course should possess the following qualifications:

• Must have finished 10 years of basic education or Alternative Learning System (ALS) equivalent.
• Must be able to communicate both orally and in writing.
• Can perform basic mathematical computations.

Shown below is the nationwide list of all the TESDA accredited schools and training centers with TESDA approved Massage Therapy NC II training course including the training center's current address and available contact numbers.   

TESDA Approved Masonry Training Courses Offered

For those who wish to study Masonry, TESDA together with TESDA accredited schools and TESDA training centers nationwide, are offering Filipinos the opportunity to avail of the TESDAS Approved Masonry Training Courses Offered. The Masonry courses offered have qualification for NC I, NC II, and NC III and can be availed for free thru the free training vouchers given by the agency to each of their accredited schools. These TESDA free training can only be given to a limited number of qualified student enrollee who are the first ones to be enrolled.

Given below are the details for the training duration and trainee qualifications for each of the TESDA approved Masonry training course.  

Masonry NC I

Minimum Training Duration

28 hours (Basic Competency)

20 hours (Common Competency)

56 hours (Core Competency)

Trainee Qualifications

Trainees or students wishing to enroll in Masonry NC I must meet the following qualifications: 

• Can communicate either oral and written
• Physically and mentally fit
• With good moral character
• Can perform basic mathematical computation and mensuration

Masonry NC II

Minimum Training Duration

 18 hours (Basic Competency)

 24 hours (Common Competency)

216 hours (Core Competency)

Trainee Qualifications

Trainees or students who wish to enroll in Masonry NC II must meet the following qualifications:

• Can communicate either oral and written
• Physically and mentally fit
• With good moral character
• Can perform basic mathematical computation and mensuration

Masonry NC III

Minimum Training Duration

 20 hours (Basic Competency)

 24 hours (Common Competency)

320 hours (Core Competency)

Trainee Qualifications

Trainees or students who wish to gain entry in Masonry NC III must have the following qualifications:

• Can communicate both oral and written
• Physically and mentally fit
• With good moral character
• Can perform basic Mathematical computation

Furnished below is the list of all the TESDA accredited schools and TESDA training centers that offer Masonry NC I, Masonry NC II, or Masonry NC III.   

TESDA Approved Language Courses Accredited Schools

For those who wish to enroll in Language Courses like Japanese Language, English Language, Korean Language, Spanish Language, Italian Language, Mandarin, French, Hebrew Language, Arabic, or Cantonese, you may enroll in any of the TESDA Approved Language Courses Accredited Schools. 

When applying for work abroad, most employer requires the applicant to have a knowledge of the language of the host country. So it is necessary for a work abroad applicant to have a knowledge or certification on the language required by the employer. Another sector that requires proficiency in specific language is the sector of online language tutorials. Nowadays, many Filipinos are employed in TESOL or Teaching English to Speakers of Foreign Languages which also requires specific credentials such as a TESDA certification in foreign language. 

Given below is the list of all the TESDA approved language courses accredited schools in each region. The names of TESDA language training centers on this list was compiled from the list provided by the agency thru their website tesda.gov.ph.   

TESDA Approved Housekeeping Vocational Training Courses Offered

For those who wish to learn Housekeeping, TESDA in partnership with TESDA accredited schools and TESDA accredited training centers, are offering the public the opportunity to enroll in TESDA Approved Housekeeping Vocational Training Courses Offered. The Housekeeping course offered by TESDA have corresponding qualifications for Housekeeping NC II and Housekeeping NC III. Provided below are the TESDA required training duration and trainee entry requirements for each of the Housekeeping vocational training course offered.   

Housekeeping NC II Minimum Training Duration

 

  18 Hrs. (Basic Competency)

  18 Hrs. (Common Competency)

400 Hrs. (Core Competency)

Housekeeping NC II Trainee Entry Requirements

Trainees or students who wish to enter this course should possess the

following requirements:

• Can communicate in English both oral and written.
• Can perform basic mathematical computation.

Housekeeping NC III Minimum Training Duration

   40 Hours (Basic Competency)

   96 Hours (Common Competency)

   64 Hours (Core Competency)

+ 64 Hours - Supervised Industry Learning (SIL)

Housekeeping NC III Trainee Entry Requirements

Trainees or students who wish to enter this training should possess the following requirements:

• Must have completed the 10-year basic education or an Alternative Learning
• System (ALS) Certificate of Completion with grade 10 equivalent holder.
• Can communicate in basic English in both oral and written form.
• Must be computer literate.
• Can perform basic mathematical computation.
• Must be competent in Housekeeping NC II qualification gained through training or experience or certification.

All of the TESDA free courses offered are made possible thru free training vouchers given to each of the TESDA accredited schools for each of the TESDA approved course they offer. The training vouchers given are limited so only early enrollees who are qualified for training will be given the slot for TESDA subsidized training.

Given below are the names of all the TESDA accredited schools and TESDA accredited training centers nationwide with TESDA approved housekeeping vocational training courses offered.   

TESDA Approved Wellness Massage Vocational Training Course

For those who wish to learn Wellness Massage or Hilot in Tagalog, TESDA together with TESDA accredited schools and training centers nationwide, is offering free training on TESDA Approved Wellness Massage Vocational Training Courses. For this TESDA course, the agency requires a total of 120 hours to successfully finish the training. Given below is the required minimum training duration for the Basic, Common, and Core Competencies in Hilot or Wellness Massage Vocational Short Course. 

18 hrs. - Basic Competencies

22 hrs. - Common Competencies

80 hrs. - Core Competencies

To qualify for the Wellness Massage free training offered by TESDA, student applicants must meet the following qualifications and must be an early enrollee to satisfy the first come first serve policy of the program:

• 18 years old and above
• Must pass the personality / aptitude test
• Can communicate effectively both oral and written form
• Physically, emotionally and mentally fit
• Good moral character 

Shown below is the nationwide list of TESDA accredited schools with TESDA approved Wellness Massage Vocational Training Course.   

TESDA Approved Heavy Equipment Operation Training Courses

For those who wish to enroll in any of the TESDA Approved Heavy Equipment Operation Training Courses. In this article, we will be providing you with all the information you need to find the nearest HEO or Heavy Equipment Operation training centers in your area. This list of TESDA accredited training centers are arranged by city or municipality and by region so you can easily find the nearest training center in you area and the TESDA approved HEO training course they offer.

These HEO courses are offered for free to a limited number of qualified student enrollees on a first come first serve basis. Those who will not be able to avail of the free Heavy Equipment Operation training can still enroll for fre by qualifying for any of the TESDA scholarship programs.

Given below is the regional list of TESDA accredited schools and training centers with TESDA registered program in HEO or Heavy Equipment Operation. If you have questions regarding the specifics of the HEO training course they offer, please get in touch with the corresponding training center.   

TESDA Approved Hairdressing Vocational Courses

TESDA Approved Hairdressing Vocational Courses offers training in performing basic hair care services such as pre and post services like, hair and scalp treatment, hair coloring, hair bleaching, hair perming, hair straightening, and basic haircutting. 

For Hairdressing NC II, TESDA's required minimum training duration for each Hairdressing NC II competency are:   

 37 hours (Basic Competencies)

 24 hours (Common Competencies)

480 hours (Core Competencies)

 40 hours Supervised Industry Learning (SIL)

Trainees or students who wish to enroll in Hairdressing NC II must possess the

following qualifications:

• Completed at least 10 years basic education or Holder of Alternative Learning Systems (ALS) certificate of completion with grade 10 equivalent.
• Basic communication skills.

For Hairdressing NC III, the agency's required minimum training duration for each Hairdressing NC III competency are:

 40 hours (Basic Competencies)

 24 hours (Common Competencies)

140 hours (Core Competencies)

 40 hours Supervised Industry Learning (SIL)

Trainees or students who wish to enroll in Hairdressing NC III must possess the following qualifications:

• Completed at least ten (10) years of basic education or Holder of Alternative Learning System (ALS) certificate of completion with grade 10 equivalent.
• Basic communication skills 

Given below is the nationwide list of all the TESDA accredited schools and TESDA training centers with TESDA approved Hairdressing vocational course 

TESDA Approved Front Office Services NC II Training Courses

For those who are looking for a TESDA accredited school with TESDA Approved Front Office Services NC II Training Course, we have gathered and compiled below, the names of all the schools and training centers with TESDA Front Office Services NC II registered program. For the said TESDA vocational course, the minimum training duration for each competency required by TESDA agency are: 

  18 Hours (Basic Competency)

  24 Hours (Common Competency)

400 Hours (Core Competency)

Trainees or students who wish to enroll into this training course should meet the following qualifications:

• Can communicate in English both in the oral and written form.
• Can perform basic mathematical computation.   

TESDA Approved Food and Beverage Services Training Course

F and B Services or Food and Beverage Services vocational course is one of the most popular TESDA courses offered. This TESDA vocational course have qualifications for NC II, NC III, and NC IV and requires the following minimum training duration and trainee entry qualifications specified by TESDA agency.

For Food and Beverage Services NC II, the minimum training duration required by TESDA for each competency are the following:

 18 hrs. (Basic Competency)

 18 hrs. (Common Competency)

320 hrs. (Core Competency)

Trainees or students who wish to enroll in F and B Services NC II should possess the following qualifications:

• Can communicate in basic English both oral and written
• At least completed the 10-year basic education
• Can perform basic mathematical computation

For Food and Beverage Services NC III, the minimum training duration required by TESDA agency for each competency are the following:

 20 hrs. (Basic Competency)

 24 hrs. (Common Competency)

186 hrs. (Core Competency)

Trainees or students who wish to enroll in Food and Beverage Services NC III should possess the following qualifications:

• Can communicate in basic English in both oral and written form
• Must have completed the 10-year basic education
• Can perform basic mathematical computation
• Must be competent in the entire Food and Beverage Services NC II qualification either through training, experience or certification

For Food and Beverage Services NC IV, the required minimum training duration required by TESDA for each competency are the following:

56 hrs. (Basic Competency)

24 hrs. (Common Competency)

60 hrs. (Core Competency)

20 hrs. (Elective)

Trainees or students wishing to gain entry into this course should possess the following qualifications:

• Can communicate both orally and in written form;
• Physically and mentally fit;
• With good moral character;
• Can perform basic mathematical computation;
• Must be competent in the entire Food and Beverage Services NC III (Restaurant) qualification either through training, experience or certification
• Given below is the list of TESDA accredited schools and TESDA training centers in each region's cities or municipalities including the specific F and B Services qualification offered by each vocational training centers.   

TESDA Approved Events Management Services Training Course

TESDA, together with TESDA accredited schools and TESDA training centers nationwide, are offering TESDA Approved Events Management Services Training Course. This TESDA vocational course has corresponding NC III qualification and is being offered to student trainees who meet the following qualifications: 

• Can communicate in basic English in both oral and written form
• Physically and mentally fit
• With good moral character
• Can perform basic mathematical computation 

For training, TESDA agency requires the following number of hours as the required minimum training duration for each competency: 

20 hrs. (Basic Competency)

24 hrs. (Common Competency)

64 hrs. (Core Competency)

Given below is the regional list of TESDA accredited schools and TESDA training centers with TESDA short course in Events Management Services.   

TESDA Approved Electronics Products Assembly and Servicing Vocational Course

For those who wish to enroll in a TESDA Approved Electronics Products Assembly and Servicing Vocational Course, we have compiled below the list of all the TESDA accredited schools and TESDA training centers that offer Electronics Products Assembly and Servicing Vocational training course. This TESDA course, have a minimum training duration of 260 hours which is divided into three training competencies:   

  40 hrs – Basic Competencies

  80 hrs – Common Competencies

140 hrs – Core Competencies

TESDA Training Requirements

To qualify for the said TESDA vocational course, trainees should possess the following qualifications:

• Must have completed at least 10 yrs. basic education or an ALS grade 10 certificate of rating holder
• Can communicate in oral and written language
• Can perform basic mathematical computations

Furnished below is the list of TESDA accredited training schools in each region with TESDA registered program in Electronics Products Assembly and Servicing NC II.

TESDA Approved Electrical Installation and Maintenance Vocational Courses

Those who are interested to enroll in a TESDA approved Electrical Installation and Maintenance vocational course can refer to the list of TESDA accredited schools and TESDA training centers that we have posted below.

In this article, we will be providing you, our readers, with a comprehensive list of all the TESDA accredited training centers nationwide with TESDA approved Electrical Installation and Maintenance training courses. This TESDA training course has 4 qualifications, Electrical Installation and Maintenance NC II, Electrical Installation and Maintenance NC III, and Electrical Installation and Maintenance NC IV. Provided below are the details of the training duration for each of the Electrical Installation and Maintenance course and the corresponding trainee qualifications.       

Electrical Installation and Maintenance NC II

Basic competencies - 18 Hours 

Common competencies - 24 Hours 

Core competencies - 154 Hours 

Total Hours: 196 Hours

Trainee Qualifications

• Must have completed at least 10 yrs. basic education or an ALS certificate of achievement with grade 10 equivalent holder.
• Must be able to communicate both orally and in writing.
• Must be able to perform basic mathematical computation.

Electrical Installation and Maintenance NC III

Basic Competencies - 32 Hours

Common Competencies - 32 Hours

Core Competencies - 96 Hours

Total Hours: 160 Hours

Trainee Qualifications

• Must be a holder and/or have undergone training in Electrical Installation and Maintenance NC II or Mechatronics Servicing NC II. 

Electrical Installation and Maintenance NC IV

Basic Competencies - 20 Hours

Common Competencies - 32Hours

Core Competencies - 464 Hours

Total Hours: 516 Hours

Trainee Qualifications

• A holder of Electrical Installation & Maintenance NC III or equivalent experience and training.
• Can communicate both oral and in written.
• Physically and mentally fit.
• With good moral character.
• Can perform basic mathematical computation.

Given below is the nationwide list of TESDA accredited schools and TESDA accredited training centers that offer Electrical Installation and Maintenance course. The list also includes the training centers current address and available contact numbers for those who wish to inquire.

TESDA Approved Driving Courses Training Centers

For those who are looking for TESDA approved driving courses training centers, we have compiled and posted below, a list of all the TESDA accredited schools and TESDA training centers nationwide that offer driving courses. Currently, there are 3 TESDA approved driving courses, Driving NC II, Driving (Passenger Bus/Straight Truck) NC III, and Driving (Articulated Vehicle) NC III. Shown below are some of the details for each of the said driving short courses.    

Driving NC II

A person who has achieved Driving NC II Certification is competent to be a Professional Driver or a Light Vehicle Driver. To successfully finish this TESDA course, you must complete the required minimum training duration for the basic, common, and core competencies for Driving NC II.

Driving NC II Training Duration

18 Hours (Basic Competencies)

20 Hours (Common Competencies)

80 Hours (Core Competencies)

Driving (Passenger Bus/Straight Truck) NC III

A person who has achieved Driving (Passenger Bus/Straight Truck) NC III Certification is qualified to be a Passenger Bus Driver or a Straight Truck Driver. And to successfully finish this short course, you need to complete the minimum training duration required for the basic, common, and core competencies for Driving (Passenger Bus/Straight Truck) NC III 

Driving (Passenger Bus/Straight Truck) NC III Training Duration 

20 Hours (Basic competencies)

20 Hours (Common Competencies)

82 Hours (Core Competencies)

Driving (Articulated Vehicle) NC III

A person who has received Driving (Articulated Vehicle) NC III certification is competent to be an Articulated Vehicle Driver or Truck Trailer Driver. And, to finish this driving training course, you must complete the minimum training duration specified for the basic, common, and core competencies for Driving (Articulated Vehicle) NC III.

Driving (Articulated Vehicle) NC III Training Duration 

20 Hours (Basic competencies)

20 Hours (Common Competencies)

68 Hours (Core Competencies)

Given below is the 2021 list of all the TESDA accredited driving schools in each city or municipality in each region.   

TESDA Approved Dressmaking Vocational Courses

 For those who wish to enroll in any of the TESDA approved Dressmaking vocational courses, we have compiled and posted below, the list of all the TESDA accredited schools and TESDA vocational training centers with TESDA registered Dressmaking NC II training course. 

TESDA technical vocational training courses is our governments answer to empower our mid level workforce with the necessary skills and training to be able to compete with their counterpart in the local and international job market. And to successfully achieve this goal in Dressmaking NC II, each trainee must complete 18 hours of training for Basic Competencies in Dressmaking NC II, 17 hours of training for Common Competencies, and 240 hours of training for Dressmaking NC II Core Competencies.

For a student or trainee to qualify for enrollment in a TESDA Dressmaking NC II training course, he or she must have the following qualifications: 

• Can communicate both oral and written
• Physically and mentally fit
• With good moral character
• Can perform basic mathematical computation

Given below is the list of all the TESDA accredited schools and TESDA training centers in each region with TESDA approved Dressmaking vocational course. Also given are the current address and contact numbers of each school and training center for those who wish to visit their offices of make an inquiry by phone. 

TESDA Approved Domestic Work Training Courses Offered

For those who wish to work abroad as a Domestic Helper or Household Service Worker, you must first pass the assessment examination given by TESDA or any of their accredited assessment centers. And to make it easier for our readers to find a TESDA accredited school or training center with TESDA approved Domestic Work training courses offered, we have provided below the complete list of all the schools and training centers that offer Domestic Work NC II training course.

The list of TESDA accredited schools with TESDA approved Domestic Work NC II courses that we have provided below was sourced from the agency's website at tesda.gov.ph. We only arranged it by Regional city or municipality to make it easier for you, our readers, to find the nearest TESDA accredited school in your area. Also given in the list below are the address and available telephone or mobile numbers of each school and training center so you can get in touch with them personally or by phone. 

TESDA Approved Cookery NC II Training Courses Offered

 For those who are looking for TESDA approved Cookery NC II training courses offered, we have gathered and posted below a list showing the names of all the TESDA accredited schools and TESDA training centers in each region that offer Cookery NC II short vocational courses.

Cookery is the art of preparing and cooking food for consumption using various cooking techniques and ingredients. A person who has achieved a Cookery NC II qualification is competent or qualified for employment in the Garde Manger, Pastry, or in the hot kitchen section as a Cook or Commis or Assistant Cook. 

The minimum training duration for Cookery NC II as required by TESDA is 316 hours where 18 hours will be spent learning the basic competencies, 18 hours for learning common competencies, and 280 hours for learning core competencies. And to qualify for enrollment in Cookery NC II, trainees or students must possess the following qualification: 

• Can communicate both in oral and written.
• Physically and mentally fit.
• With good moral character.
• Can perform basic mathematical computation.

Given below are the names of all the TESDA accredited schools and training centers in each region with TESDA approved Cookery training course. For inquiries in connection with the Cookery short course they offer, please get in touch with the corresponding training center in the list.

TESDA Approved Contact Center Services Courses Training Centers

 For those who wish to work in B.P.O. or Business Process Outsourcing as a Customer Support or Service Representative or what we commonly call a Call Center Agent. TESDA, together with a number of TESDA accredited schools and training centers, are offering Contact Center Services NC II training course. These TESDA approved Contact Center Services courses training centers are operating under constant monitoring and supervision by TESDA agency to ensure they provide proper training that is comparable with international competency standards.

To successfully complete the Contact Center Services training course, a student trainee must complete a total of 144 hours minimum training duration. Of the said 144 hours, 18 hours will be spent learning Basic Competencies, 18 hours for Common Competencies, and 108 hours for learning Core Competencies.  And to qualify for training in a TESDA approved Contact Center Services course, a student trainee must meet the following qualifications:

• Must have completed at least 10 yrs. basic education or an ALS certificate of achievement with grade 10 equivalent holder.
• Can communicate in English either oral or written.

Given below are the names of all the TESDA approved Contact Center Services courses training centers nationwide.   

TESDA Approved Computer Systems Servicing Training Course

For those who wish to study Computer Systems Servicing, TESDA in partnership with a number of TESDA accredited schools and TESDA training centers, are now offering TESDA approved Computer Systems Servicing training course.

The TESDA Computer Systems Servicing course covers basic and common competencies in installation, maintenance, configuration, and diagnosis of computer systems and networks. For this TESDA vocational course, the required minimum training duration is 280 hours, 40 hours of which is allotted for learning basic competencies for Computer Systems Servicing, 80 hours for learning common competencies, and 160 hours will be spent learning core competencies.

To qualify for enrollment in a TESDA approved computer systems servicing course, a trainee or student should possess the following qualifications:     

• Can communicate either oral and written.
• Must pass the trainability/aptitude test.

A person who has achieved NC II Qualification in Computer Systems Servicing is competent to be work fill any of the following positions:

• Computer Assembler
• Computer Service Technician
• Network Technician
• Computer Maintenance Technician

Shown below are the names of all the TESDA accredited schools and TESDA training centers with TESDA approved Computer Systems Servicing NC II course offered.

TESDA Commercial Cooking Courses and Training Centers

 For those who wish to work as a chef in a hotel or restaurant, you may enroll in any of the TESDA commercial cooking courses and training centers. 

Commercial Cooking is the practice of professionally preparing different meals within large-scale settings such as schools, commercial kitchens, and restaurants. It has 2 qualifications, Commercial Cooking NC III and Commercial Cooking NC IV. Shown below are the details for both Commercial Cooking NC III and Commercial Cooking NC IV

Commercial Cooking NC III Training Duration

20 hours Basic Competencies

24 hours Common Competencies

200 hours Core Competencies

Commercial Cooking NC III Trainee Entry Qualifications

• Can communicate in basic English in both oral and written form
• Physically and mentally fit
• With good moral character
• Can perform basic mathematical computation
• Must be competent in the entire Commercial Cooking NC II qualification either through training, experience or certification

A person who has achieved this Qualification is competent to work as a Chef de Partie or as a Head Chef.

Commercial Cooking NC IV Training Duration

56 hours Basic Competencies

24 hours Common Competencies

180 hours Core Competencies

Commercial Cooking NC IV Trainee Entry Qualifications

• Can communicate both orally and in written form;
• Physically and mentally fit;
• With good moral character;
• Can perform basic mathematical computation;
• Must be competent in the entire Commercial Cooking NC III qualification either through training, experience or certification

A person who has achieved this Qualification is competent to be a Sous Chef, or an Executive Sous Chef, or as a Restaurant Chef.   

TESDA Approved Carpentry Training Course

For those who wish to learn Carpentry, TESDA together with a number of TESDA accredited schools and TESDA training centers, are offering TESDA approved Carpentry training course. The carpentry training courses offered have NC II and NC III qualifications. For Carpentry NC II, the minimum training duration required by TESDA is 162 hours. Of the said training duration, 18 hours will be used learning the basic competency for Carpentry NC II, 24 hours will be spent learning common competency, and 120 hours is allotted for learning core competency.

To qualify for training in Carpentry NC II, a student enrollee must meet the following qualifications:  

• A holder of National Certificate Level I.
• Good Moral Character.
• Ability to communicate.
• Physically fit and mentally healthy.
• Can perform basic mathematical computation and mensuration.

Carpentry NC III on the other hand has a required minimum training duration of 364 hours where 20 hours of which will used in learning the basic competency for Carpentry NC III. For common competency, 24 will be allotted and 320 hours for core competency.  

To gain entry in Carpentry NC III, an student enrollee should have the following qualifications:

• Can communicate both oral and written
• Physically and mentally fit
• With good moral character
• Can perform basic mathematical computation and mensuration
• Ability to communicate ideas

Provided below is the list of all the TESDA accredited training schools in each region that offer Carpentry NC II or Carpentry NC III.   

TESDA Approved Caregiver Training Course

For those who wish to enroll in a TESDA Approved Caregiver Training Course, we will be providing at the end of this posting, a list of all the TESDA accredited schools and TESDA training centers with TESDA Caregiving courses offered. 

Caregiving NC II vocational course has a nominal training duration of 786 hours. Of these, 18 hours will be spent learning Basic Competencies, 18 hours will also be spent in learning Common Competencies, and 750 hours learning Core Competencies for a total learning duration of 786 hours minimum.

To gain entry in a TESDA approved caregiver course offered, a trainee or student. must meet the following qualifications:  

• Can communicate both in oral and written.
• Physically and mentally fit.
• With good moral character.
• Can perform basic mathematical computation.

The qualifications listed above does not include specific institutional requirements needed by the school or training center delivering the TVET program. Given below are the names of all the Caregiver training centers in each region including their address and available contact numbers.   

TESDA Approved Bread and Pastry Production Training Courses

The Bread and Pastry Production NC II course offered by TESDA and its accredited schools is composed of competencies that an individual should attain in order for them to satisfactorily perform the duties and responsibilities. A person who is a Bread and Pastry Production NC II certified by TESDA is qualified to apply for the positions of Pastry Commis or as a Baker in hotels, restaurants, or cruise ships. 

All TESDA approved Bread and Pastry Production Training Courses offered by TESDA accredited schools and training centers should have a minimum training duration of 141 hours wherein 18 hours should be spent learning Basic Competencies, 18 hours for learning Common Competencies, and 105 hours should be spent for learning Core Competencies. 

To qualify for enrollment in any of the TESDA approved Bread and Pastry Production NC II vocational course, all trainee or student must possess the following qualification:

• Can communicate in basic English either oral and written
• At least high school graduate
• Physically and mentally fit
• With good moral character
• Can perform basic mathematical computation
• With pleasing personality

Given below is the list of names of all the TESDA accredited schools and TESDA training centers with Bread and Pastry Production training course offered. This list is arranged alphabetically and by region you can see all the Bread and Pastry Production courses offered near you.