TESDA Approved Security Services Training Courses Offered

For those who wish to work as Security Guards and would like to have the proper training to qualify for work in the security services sector. At present, there are close to 50 TESDA accredited schools nationwide with TESDA Approved Security Services Training Courses Offered. Given below are the details for Security Services NC I and Security Services NC II. 

SECURITY SERVICES NC I

Minimum Training Duration 

  28 hrs. (Basic Competencies)

  36 hrs. (Common Competencies)

106 hrs. (Core Competencies)

TRAINEE ENTRY REQUIREMENTS

Trainees or students who wish to enroll in Security Services NC I should possess the following qualifications:

• Filipino citizen.
• High School Graduate;
• Physically and mentally fit.
• Not less than eighteen (18) years of age nor more than fifty (50) years of age (for new applicants and SGs in non-supervisory position).
• Has undergone a pre-licensing training course or its equivalent.

SECURITY SERVICES NC II

Minimum Training Duration 

 18 hrs. (Basic Competencies)

 40 hrs. (Common Competencies)

165 hrs. (Core Competencies)

TRAINEE ENTRY REQUIREMENTS

Trainees or students wishing to enroll in these course qualifications should possess the following qualifications:

• Must possess a Private Security License/Special Bank Receipt (SBR) authenticated by the Personnel Licensing Section – SAGSD-PNP to exercise profession.
• Must possess Pre-Licensing Training Certificate or its equivalent duly authorized by the Private Security Training Management Branch (PSTMB-SAGSD-PNP) under Section 3 Rule V of the 2003 Revised Rules and Regulations Implementing RA 5487 As Amended.
• Ability to communicate.
• Physically fit and mentally healthy as certified by a Public Health Officer.

For your convenience, we have given below the regional list of all TESDA accredited schools with TESDA approved Security Services NC I or Security Services NC II training course offered.   

TESDA Approved RAC Servicing Training Courses Offered

For those who wish to learn Refrigeration and Air Conditioning Servicing, we at tesdaapprovedcourses.blogspot.com have gathered and posted below, a list showing the names of all the schools and training centers nationwide that are TESDA accredited and has TESDA Approved RAC Servicing Training Courses Offered.

This Refrigeration and Air Conditioning Servicing course is included in the list of tec-voc courses being offered by TESDA thru TESDA accredited schools. These accredited schools and training centers are constantly monitored by the agency to make sure they comply with the training standards required for each competency.

Provided below is the nationwide list of TESDA accredited schools and TESDA training centers with TESDA approved RAC Servicing training courses offered.   

TESDA Approved Plumbing Vocational Courses Offered

For those who wish to learn Plumbing, TESDA, together with a number of TESDA accredited schools nationwide, are offering Filipinos the chance to enroll in TESDA Approved Plumbing Vocational Courses Offered. These Plumbing vocational courses offered are for Plumbing NC I, Plumbing NC II, and Plumbing NC III and given below are the details for each of the said Plumbing training course.

PLUMBING NC I

Nominal Training Duration 

 

 28 Hrs. (Basic Competency)

 20 Hrs. (Common Competency)

120 Hrs. (Core Competency)

TRAINEE ENTRY REQUIREMENTS

• At least Junior High School (Grades 9 and 10) level or graduate.
• Can perform basic mathematical computation.
• Able to communicate orally and in writing.

PLUMBING NC II

Nominal Training Duration

 18 Hours (Basic Competency)

 24 Hours (Common Competency)

160 Hours (Core Competency)

TRAINEE ENTRY REQUIREMENTS

• At least Senior High School (Grade 11 and 12) level or graduate.
• Holder of Plumbing NC I or relevant industry experience (plumbing works) for a minimum of 2 years in all of the following:

1. Prepare Plumbing Layout
2. Make Piping Joints and Connections
3. Perform Minor Construction Works
4. Install and Assemble Single Plumbing Unit

      Note: Certified by the employer or a Registered Master Plumber

• Able to communicate orally and in writing.
• Can perform basic mathematical computations.

PLUMBING NC III

Nominal Training Duration

 24 hours (Basic Competency)

 24 hours (Common Competency)

200 hours (Core Competency)

TRAINEE ENTRY REQUIREMENTS

• At least Grade 12 graduate.
• Holder of National Certificate for Plumbing NC II or relevant industry. experience (plumbing works) for a minimum of 3 years in all of the following:

1. Prepare estimation of materials for single plumbing unit
2. Perform Complex Plumbing Installation and Assemblies
3. Conduct pipe leak testing
4. Perform plumbing repair and maintenance works

      Note: Certified by the employer or a Registered Plumber

• Able to communicate orally and in writing.

To make your search, for TESDA accredited schools with Plumbing course offered, easier, we have arranged the names of the training centers by region and by city or municipality and posted it below. Also included are the specific Plumbing course they offer, the training centers current address, and their available contact numbers.   

TESDA Approved Organic Agriculture Production Training Courses Offered

For those who wish to learn Organic Farming, TESDA together with a number of TESDA accredited schools and TESDA training centers nationwide, are offering Filipinos, the chance to enroll in TESDA Approved Organic Agriculture Production Training Courses Offered.

The Organic Agriculture Production NC II vocational training course is composed of competencies that an individual must achieve to produce organic farm products like chicken and vegetables including the production of organic supplements like extracts, concoctions, and fertilizers. It has two elective competencies which are raising organic small ruminants and raising organic hogs. Provided below are the details of training duration and trainee entry qualifications for Organic Agriculture Production NC II 

Nominal Training Duration

 

18 hrs. Basic Competencies

64 hrs. Common Competencies

96 hrs. Core Competencies

54 hrs. Elective Competencies

Trainee Entry Qualifications

Trainees or students wishing to enroll in this course must have the following qualifications:

• Able to read and write.
• With good moral character.
• Ability to communicate, both oral and written.
• Physically fit and mentally healthy as certified by a Public Health Officer.

Those who have successfully achieved Organic Agriculture Production NC II qualification is competent to work as:

Organic Agriculture Farmer

Organic Chicken Raiser

Organic Hogs Raiser

Organic Small Ruminants Raiser

Organic Vegetables Farmer

Organic Concoctions and Extracts Producer

Organic Fertilizer Producer

 

Given below are the names of all the TESDA accredited schools and TESDA training centers in each region with TESDA approved Organic Agriculture Production training courses offered.   

TESDA Approved Motorcycle/Small Engine Servicing Vocational Courses Offered

For those who are looking for TESDA accredited schools with TESDA Approved Motorcycle/Small Engine Servicing. These accredited schools and training centers nationwide are under guidance and strict monitoring by TESDA agency to make sure comply in accordance with industry standards. Given below is the required minimum training duration and trainee qualifications for Motorcycle/Small Engine Servicing NC II.

Minimum Training Duration: 

 18 Hours (Basic Competency)

 88 Hours (Common Competency)

544 Hours (Core Competency)

Trainee Qualifications

Trainees or students should possess the following requirements:

• Can communicate both orally and in writing.
• Can perform basic mathematical computation.
• At least Senior High School (Grade 11 ) level.
• At least holder of Student Permit or LTO license (Restriction Code 1).

For a more convenient search, we have arranged the list of TESDA accredited schools, by region and by city or province. Furnished below is the regional list of all the TESDA accredited schools and TESDA training centers with TESDA approved Motorcycle/Small Engine Servicing training course offered.   

TESDA Approved Mechatronics Servicing Training Courses Offered

For those who wish to study Mechatronics, TESDA together with some of the TESDA accredited schools nationwide, are offering the public the chance to enroll in any of the TESDA Approved Mechatronics Servicing Training Courses Offered. The TESDA approved Mechatronics Servicing courses have qualifications for NC II, NC III, and NC IV and given below are details for the training duration and trainee entry requirements for each of the Mechatronics Servicing Course. 

Mechatronics Servicing NC II

Nominal Training Duration: 

18 hrs – Basic Competencies

60 hrs – Common Competencies

80 hrs – Core Competencies

Trainee Entry Requirements

The trainees who wish to enter the course should possess the following requirements:

Must have completed at least 10 yrs. basic education or an alternative learning systems (ALS) certificate of achievement with grade 10 equivalent holder.

Can communicate orally and in writing.

Can perform basic mathematical computations.

Mechatronics Servicing NC III

Nominal Training Duration: 

 

  32 hrs – Basic Competencies

  60 hrs – Common Competencies

104 hrs – Core Competencies

Trainee Entry Requirements

The trainees who wish to enter the course should possess the following requirements:

Must have completed training in Mechatronics Servicing NC II.

Can communicate orally and in writing.

Can perform basic mathematical computations.

Mechatronics and Automation Servicing NC IV

Nominal Training Duration: 

  30 hrs – Basic Competencies

  64 hrs – Common Competencies

106 hrs – Core Competencies 

Trainee Entry Requirements

The trainees who wish to enter the course should be holder of Mechatronics Servicing NC III.

Shown below are the names of all the TESDA accredited Mechatronics Servicing Training Schools nationwide including the specific Mechatronics Servicing course they offer, the training center's current address, and their available contact numbers that you can dial to make inquiries.   

TESDA Approved Machining Vocational Courses Offered

 For those who wish to learn Machining, TESDA together with a number of TESDA accredited schools nationwide, are offering Machining NC I, Machining NC II, and Machining NC III.

Shown below are the details for the Training Duration and Trainee Entry Qualifications for Machining NC I. 

Nominal Training Duration: 

 47 Hours (Basic Competencies)

 60 Hours (Common Competencies)

859 Hours (Core Competencies)

624 Hours (SIT)

-------------

 1,590 Hours

Trainee Entry Qualifications for Machining NC I

To qualify for enrollment in Machining NC I, all enrollees must have the following qualifications:

• Able to read and write.
• Can perform basic mathematical computation.
• Ability to communicate (non-verbal and verbal).
• Physically fit (health condition).

For Machining NC II, the required training duration for the Basic, Common, and Core Competencies are:

 

 18 Hours (Basic Competency)

 12 Hours (Common Competency)

307 Hours (Core Competency)

Trainee Entry Qualifications for Machining NC II

To qualify for enrollment in Machining NC II, all enrollees must have the following qualifications:

• With good moral character.
• Able to communicate both orally and in writing.
• Physically and mentally fit.

For Machining NC III, the required Minimum Training Duration is 342 Hours and to qualify for enrollment in Machining NC III, student trainees must have the following qualifications:

• Must be holder of Machining NC II.
• Must be high school graduate.
• With good moral character.
• Ability to communicate.
• Physically and mentally fit.

Provided below are the names of all the TESDA accredited schools and TESDA training centers nationwide with TESDA approved Machining vocational courses offered.   

TESDA Approved Massage Therapy Training Course

For those who wish to learn Massage Therapy, TESDA in partnership with some of the TESDA accredited schools and TESDA training centers, are offering free Massage Therapy training to a limited number of qualified student enrollees. The said Massage Therapy course has an NC II level qualification and requires the following minimum training duration for each competency:   

MASSAGE THERAPY NC II

Minimum Training Duration:

 20 hrs. Basic Competencies

 56 hrs. Common Competencies

624 hrs. Core Competencies

To qualify for Massage Therapy training, trainees or students who want to enroll in this course should possess the following qualifications:

• Must have finished 10 years of basic education or Alternative Learning System (ALS) equivalent.
• Must be able to communicate both orally and in writing.
• Can perform basic mathematical computations.

Shown below is the nationwide list of all the TESDA accredited schools and training centers with TESDA approved Massage Therapy NC II training course including the training center's current address and available contact numbers.